Ernest Doe. Where you can buy with confidence. Ernest Doe. Where you can buy with confidence.

Head office: 01245 380311

Branch Locator

Head office: 01245 380311

New Holland – T5 Electro Command

  • t5-tier-4b-gallery-16
  • t5-tier-4b-gallery-09
  • t5-tier-4b-gallery-10

NEW HOLLAND T5 ELECTRO COMMAND – RESPONSIVE PRODUCTIVITY

The entire T5 Electro Command range boasts 3.4 litre Common Rail F5C engines developed and produced by FPT Industrial that fully comply with the stringent Tier 4B emissions regulations. The optimised, powerful, super-quiet engines develop between 99 – 117hp(CV), have up to 491Nm of max torque and have 24% more torque backup for guaranteed productivity. Throw in a power-to-weight ratio of just 38.9kg/hp(CV) and the T5 Electro Command is your perfect farming partner. The entire T5 Electro Command range will use a ECOBlue™ Compact HI-eSCR and Low Rate Exhaust Gas Recirculation (EGR) for Tier 4B compliance. This is in alignment with the New Holland Tier 4B strategy, which foresees the use of Compact SCR and Low Rate EGR for lower powered products with reduced cooling requirements and for which overall product dimensions are of vital importance. It all adds up to outstanding efficiency. What you’ve come to expect of the Clean Energy Leader.

New Holland Agriculture

Want to know more?

Contact your nearest store

Contact us Online

ECOBLUE™ COMPACT HI-ESCR EXPLAINED

Specifically designed for the F5C engine, FPT Industrial developed a compact version of its HI-eSCR, an evolution of the existing ECOBlue™ SCR system, you will benefit from the highest NOx conversion efficiency in the industry. This multipatented system uses a new Engine Control Unit, which not only manages the engine, but also the HI-eSCR after treatment system by controlling the supply and dosing modules. Using a dedicated closed loop system, it continuously monitors the NOx levels in the exhaust gases, ensuring that during every cycle the precise amount of AdBlue is injected to achieve NOx conversion of over 95%, all while guaranteeing low fluid consumption.

POWERED BY FPT INDUSTRIAL

New Holland are not going it alone when it comes to Tier 4 technology, they can draw on the experience of their in-house engine development specialist: FPT Industrial.

MORE TIME WORKING, LESS TIME MAINTAINING

Advanced engineering design means lower maintenance demands. All T5 Electro Command models benefit from New Holland’s industry leading 600-hour service intervals, and they all run on easily available standard oils. Choose New Holland to save money, downtime and to protect the environment.

MAINTAINING PERFORMANCE. ALWAYS

New Holland are passionate about transient response. Put simply, as your F5C engine is equipped with the new Compact HI-eSCR, it can react even quicker when placed under load. Therefore, when you’re transporting fully laden grain trailers and you encounter a hill, you’ll be able to maintain constant forward speed.

SIMPLE ESM. TAKING THE HASSLE OUT OF THROTTLE CONTROL

A versatile tractor needs to be equally suited to PTO and heavy draft applications. With Engine Speed Management (ESM) the advanced engine management system will precisely fuel the engine so it will accommodate fluctuations in engine load whilst maintaining the desired engine speed. For convenience, two engine speeds can be memorised. You can then simply toggle between the speeds using a button on the transmission controller.

T5.100

Max. horsepower - ISO TR14396- ECE R120 [kW / hp(CV)]Max. torque - ISO TR14396 (Nm)4WD front axleMax. lift capacity at ball ends (kg)
73 / 99430@1500rpmStandard5420

T5.110

Max. horsepower - ISO TR14396- ECE R120 [kW / hp(CV)]Max. torque - ISO TR14396 (Nm)4WD front axleMax. lift capacity at ball ends (kg)
79 / 107468@1500rpmStandard5420

T5.120

Max. horsepower - ISO TR14396- ECE R120 [kW / hp(CV)]Max. torque - ISO TR14396 (Nm)4WD front axleMax. lift capacity at ball ends (kg)
86 / 117491@1500rpmStandard5420

Manufacturers Represented


Want to know more?

Contact us Top

Website built by Rubious.